Asus Rog Phone 3 Firmware install, How to install Asus Rog Phone 3 Firmware?, Asus Rog Phone 3 ZS661KS Android 12 Update, Asus Rog Phone 3 Stock ROM Install
Contents
Asus Rog Phone 3 Firmware install
Welcome to the Asus Rog Phone 3 software installation guide. In this guide, we will explain the software installation and upgrade process, regardless of whether the phone is Original, Rooted, or repaired imei. In this article, we will install software in raw format, different from normal software. RAW software is original and compiled differently. They are not custom ROMs.
Download Asus Rog Phone 3 RAW Firmware
First of all, download the phone software from the link below and extract the downloaded archive to a folder on the desktop. (For example: Right click the archive and say Extract to WinRAR Folder.) Now proceed to the steps of preparing the phone for installation.
WW ZS661KS 31.0210.0210.258 (Android 12) > Download
WW ZS661KS 18.0410.2203.201 (Android 11) > Download
Asus Rog Phone Bootloader Mode
- Turn off the phone completely by pressing the Power key, and holding the Volume Up + Power key as in the picture below, we put it into Bootloader mode.
- We connect the phone to the USB and the computer with the Top Type-C port on the side. Leave the phone like that for now.
- Press the
Win+R keys together on your keyboard. The Run window will open. Type “devmgmt.msc” in the Open section and press the OK Button.
- Here the phone should show as “Android Bootloader Interface”. If it does not appear, click here How to install Google USB Driver? Go to the article and install the drivers and then continue from there.
Asus Rog Phone 3 Firmware install
- If the computer saw the phone as a bootloader, now let’s move on to the installation step. Navigate to where you previously downloaded and extracted to the folder. Here run the “flashall_AFT.cmd” file. This download will not delete anything from the phone, it will only upgrade it, but be sure to take backups just in case.
- The software installation process will take place in the black screen window as below. The phone will reboot into bootloader mode several times. Device sound may come from the computer. Installation will take about 5-10 minutes.
- Black cmd screen will be closed when the process is finished. You can turn on the phone by pressing the power button once.
If the installation gets stuck in the “Reboot bootloader” section, make sure that “Android Bootloader Interface” appears in the device manager without touching anything. If it does not appear, install the driver again at that time, and the installation will continue.