Fix Reboot and Select proper Boot device Error Message. Reboot and Select proper Boot device or Insert Boot Media in selected Boot device and press a key_
Reboot and Select proper Boot device Error
When you turn on your computer, you may see a warning like “Reboot and Select proper Boot device or Insert Boot Media in selected Boot device and press a key_” This error means that the computer will install, that is, could not find an installation device. To further explain; Because your operating system is on your hard disk, it means that the computer could not find any storage to open the operating system.
Bu durumun nedeni olabilir. Bu hata basit olabilir gibi masraflı bir sorun da olabilir. Şimdi gelelim bu hata mesajını evde kendimiz nasıl düzeltebiliriz?
Step 1: Check the SATA cable to which your drive is connected.
If your computer is a desktop, check the SATA cable to which the Disk is connected. You can connect to a different sata connection. Try restarting the computer after you try.
Step 2: Reset your Bios settings
You can reset the bios settings to the factory state to see if the problem is solved. The bios settings and menu are different on each computer. Here you need to find a phrase like “Load default settings” and apply it.
Step 3: Set the first device to be installed as Harddisk
This setting will be checked first from the Bios menu, so you should set the “1 st boot device” option to the disk where your operating system is installed. If you do not see your hard drive here, your drive may be burned.
Step 4: Change the Sata mode
Gene Bios menu, you can access this setting with the Sata mode to change the cause of the problem can find out. If the Sata mode is “IDE” when the operating system is installed, you cannot use it in “AHCI” mode. Conversely, if Sata Mode is “AHCI”, you cannot make an “IDE” afterwards. You can find out if this caused the problem by doing AHCI or IDE in the Sata configuration section of the bios settings.
Bios sata modes can be found here.
Step 5: Your harddisk may be corrupted.
The last option remains; Your harddisk may be corrupted. In this case, the computer issues this error because it cannot detect a disk. In this case, you can provide a solution by installing a second disk in your hand and installing the operating system.
If you do not have technical skills, take the computer to a technical service. You can deepen the problem further. If your Bios software is not a problem, the problem is probably on the disk by installing a new disk and installing Windows to solve the problem.