ROOT Samsung Galaxy J3 Pro 2017, Install TWRP, SM-J330

How to ROOT Samsung Galaxy J3 Pro 2017 and Install TWRP, Rooting Galaxy J3 Pro 2017 SM-J330F/G Android 8.0 Oreo, Install TWRP Recovery on Samsung Galaxy J3 Pro 2017

You can Root Samsung Galaxy J3 Pro 2017 SM-J330x Model with the method that we show below.

WARNING: Before starting this process, make sure to back up user data like phonebook, applications, internal storage etc. since it is going to remove all of your data in your phone. Also, some of the applications may not work, it will end your phone’s warranty. You accept the responsibility for all of the possible consequences.

Method 1

Find Out Your Phone’s Model Number

First of all, we need to learn our phone’s model number. To be able to do this, go to Settings / About Device and look at the code in Model Number section. If it is in the list below, then we get to Rooting process. For Instance: “SM-J330F”

Firstly, you need to download the tools. Install Samsung Mobile USB Drive to your computer. Unzip Odin3 program to your desktop. Leave TWRP.img.tar file that you have downloaded on your desktop. Transfer the UPDATE-SuperSU-v2.82.zip file to the phone’s internal storage location.
Odin3 v3.13.1 Downlad
SAMSUNG Mobil USB Driver Download
 UPDATE-SuperSU-v2.82.zip > Download
 For SM-J330 : TWRP File / Alternative

How to Install TWRP on Samsung Galaxy J3 Pro 2017

Open Developer Options
Step 1: Open Developer Options.

  1. Go to Settings > About Device > Software Information to enable Developer Options.
  2. Click on Build Number section 5-6 times repeatedly until you see “You are now a developer”
  3. Then go back to Developer Options and enable OEM Unlocking and USB Debugging

Step 2: Unzip “Odin.zip” folder that you have downloaded to your desktop. Make sure that TWRP files with .tar and .md5 extensions on desktop. Also, you need to be sure that these TWRP files that you have downloaded are compatible with your device’s model. After running Odin3.exe, click on “AP” button. Here, select twrp-3.2.1-0-j7xelte.img.tar file.

ROOT Samsung Galaxy J3 Pro 2017 and Install TWRP

Step 3: Shut down your phone completely by holding power button. Then, press and hold on Volume Down + Home + Power buttons at the same time until Download Mode is started. When Download mode starts, press on Volume Up button once.

ROOT Samsung Galaxy J3 Pro 2017 and Install TWRP

Step 4: IMPORTANT POINT: Before clicking on Start button, you need to disable Auto Reboot option on Odin. To do this, get to Options tab on Odin and disable “Auto-Reboot” option. If you don’t apply this change, then your device will get stuck on loading screen.

ROOT Samsung Galaxy J3 Pro 2017 and Install TWRP

Step 5: Then, connect your phone to computer through USB Cable. You will see ID:COM point becoming BLUE on Odin. After ID:COM point becomes BLUE, then click on “Start” button to start the installation process.

ROOT Samsung Galaxy J3 Pro 2017 and Install TWRP

Step 6: When TWRP installation is over, you will see PASS notification on Odin. At this point, you should unplug your phone from USB and activate TWRP Recovery Mode. To activate TWRP Mode, press and hold Volume Up + Home + Power buttons and release them when you see “SAMSUNG” on your screen. TWRP mode is active now.

Step 7: When the device is in TWRP Mode, you should click on Keep Read Only button. Then, click on Wipe and Format Data buttons. Type or click on YES and press on Blue ENTER button. After that, go back to TWRP main page and click on Reboot > Recovery buttons respectively.

ROOT Samsung Galaxy J3 Pro 2017 and Install TWRP

ROOT Samsung Galaxy J3 Pro 2017 and Install TWRP

How to Root Samsung Galaxy J3 Pro 2017

Step 8: It will restart your phone in TWRP mode. At this point, you should connect your phone through USB Cable again. Then, click on Keep Read Only button. You will see phone’s storage on your computer. Find UPDATE-SuperSU-v2.82.zip files that you have already download and transfer them into phone’s internal storage.

Step 9: At this point, you should click on Install button while you are on the TWRP main page. Later, select UPDATE-SuperSU-v2.82.zip file and swipe “Swipe to Install” button to right side.ROOT Samsung Galaxy J3 Pro 2017 and Install TWRP

Step 10: Press on the home button to get back to TWRP main page. Click on Reboot > System buttons respectively. Your rooted phone will start afterwards.

ROOT Samsung Galaxy J3 Pro 2017 and Install TWRP

Method 2

Find Out Your Phone’s Model Number

First of all, we need to learn our phone’s model number. To be able to do this, go to Settings / About Device and look at the code in Model Number section. If it is in the list below, then we get to Rooting process. For Instance: “SM-J330F”

You need to download the tools at first. If you have Samsung Mobile USB Drive on your pc already installed, then you don’t need to install it again. If not, you should download and install.
Odin3 v3.12.3 Download
SAMSUNG Mobil USB Driver Download

Samsung Galaxy J3 Pro 2017 Root File

SM-J330G Root File For Android 7.0

How to Root Samsung Galaxy J3 Pro 2017

Open Developer Options
Step 1: Open Developer Options.

  1. Go to Settings > About Device > Software Information to enable Developer Options.
  2. Click on Build Number section 5-6 times repeatedly until you see “You are now a developer”
  3. Then go back to Developer Options and enable OEM Unlocking and USB Debugging

Step 2: Unzip “Odin.zip” folder that you have downloaded to your desktop. Then, go to the Root file archive that you have downloaded. Make sure that the root file is compatible with your phone’s model. Take the files with .tar and .md5 extensions from there and drop them on desktop. After that, run Odin3.exe.

Step 3: After running Odin3.exe, click on “AP” button. Select the root file here. For Instance: CF-Auto-Root-j7elte-j7eltexx-smj700f.tar.md5

Step 4: Shut down your phone completely by holding power button. Then, press and hold on Volume Down + Home + Power buttons at the same time until Download Mode is started. When Download mode starts, press on Volume Up button once. Then, connect your phone to computer through USB Cable. You will see ID:COM point becoming BLUE on Odin.

ROOT Samsung Galaxy J3 Pro 2017 and Install TWRP

Step 5: After ID:COM point becomes BLUE, then click on “Start” button to start the installation process. When it is over, you will see “PASS” on Odin. You will see Red Piracy Android and Samsung logos on your screen. At this point, your phone will start. You can check SuperSU application. Rooting process is over and if you wish, you can continue to install TWRP Recovery Mode.

ROOT Samsung Galaxy J3 Pro 2017 and Install TWRP

ROOT Samsung Galaxy J3 Pro 2017 and Install TWRP processes are over. Congratulations!

Subscribe
Notify of
guest
0 Comment
Inline Feedbacks
View all comments